Repair first?How do you choose between repairing and replacing a septic tank?
Choose by what failed. The EPA says a concrete tank may last 50 years or more, while pumps and controls need replacing every 10 to 20 years and a system over 25 to 30 years old is due for planning an upgrade. Six routes, from one part to a whole new system.
1Repair a part
When the tank itself is sound
Many tank problems are one part: the baffles that keep solids in, the lid, the effluent filter or the pump. Fixr's average septic repair is $2,000, in a $750–$3,000 range.
Price: Baffle $300–$900, lid $150–$500, effluent filter $200–$300 (Fixr, Jan 2025); Bob Vila puts a baffle at $300–$500.
Good
- A fraction of a new tank
- The drain field and permit stay as they are
Watch out
- A cracked tank costs $2,000–$10,000 to repair (Fixr), close to a new one
- Doesn't help a failing drain field
Read Fixr's repair prices
2Replace the tank only
Tank failed, field still works
A new tank goes in where the old one was, connected to the existing drain field. The old tank is either dug out or, where local rules allow, left in place (EPA).
Price: $9,500–$15,000 including removal (Fixr). The tank alone is $500–$2,500 (Today's Homeowner).
Good
- Keeps a working drain field
- Tank-only permits can be small: $94 in Inyo County, CA; $802 in Multnomah County, OR
Watch out
- Removal alone is $5,000–$6,000 (Fixr)
- A new tank won't fix a failing field
Read Fixr's tank and removal prices
3Replace the drain field
The usual five-figure part
The drain field (leach field) is the trenches or beds that spread the tank's water into the soil. In Bob Vila's conventional-system example, it's about $3,500 of a $5,000 system.
Price: $2,000–$20,000 to replace (Fixr); $6,000–$7,000 (Modernize, Oct 2026). Rejuvenating a field runs $1,000–$5,000 (Fixr).
Good
- Fixes the part that stops draining
- Keeps a sound tank
Watch out
- Needs a perc test: $600–$800 (Fixr) or $700–$2,000 (This Old House)
- Poor soil can force an engineered system
Read Bob Vila on tank and field costs
4Replace the whole conventional system
New tank and new field
A conventional system is a tank plus a gravity drain field, the cheapest kind to build where the soil passes. The EPA's homebuyer guide gives a system an average life of 15 to 40 years.
Price: $5,000–$15,000 to repair or replace one (EPA, Mar 2026); a new standard system averages $6,100 (Fixr), and septic tank installations about $7,500 (This Old House).
Good
- Everything new at once
- The cheapest full system where soil allows
Watch out
- Permits run $400–$2,300 in the guides; repair permits in the four fee schedules read were $94–$2,244
- Digs up the yard
Read the EPA's cost note
5An engineered system: sand filter, drip or mound
When the soil fails
Where the soil drains too fast or too slow, or the water table is high, the health department may require a sand filter, drip lines or a mound. The EPA says sand filters cost more than a conventional system and drip systems add expense and maintenance.
Price: Sand filter $7,000–$18,000, drip $8,000–$18,000, mound $10,000–$20,000 (This Old House, Mar 2026).
Good
- Works on sites a conventional field can't use
- Often the only system a permit allows there
Watch out
- About two to three times a conventional system's price
- More parts to maintain
Read the EPA's system types
6An aerobic treatment unit (ATU)
Air-treated, most upkeep
An ATU pumps air into the tank so bacteria break waste down further before it reaches the field. Fixr, This Old House, Today's Homeowner and Modernize all put it at $10,000–$20,000.
Price: $10,000–$20,000 (Fixr; This Old House, Mar 2026).
Good
- Cleaner water to the field
- An option where a plain tank won't pass
Watch out
- "Regular life-time maintenance should be expected" (EPA)
- Its air devices last 3–7 years (University of Minnesota)
Read how long each part lasts